TP-LINK N600 Instalační příručka stáhnout pdf (Strana 12)

7. Feed the Ethernet cable through the hole and set the ceiling tile back into

place.

8. Connect the Ethernet cable to the ETHERNET port.

■

Wall Mounting

There are two wall-mounting slots on the back of the mounting bracket. To mount

the EAP on a wall, please follow the steps below.

1. Make two small pencil marks on the wall. Make sure the two marks are level

and should be 98.6mm apart.

2. Use a drill with the appropriate size drill bit to drill two 4mm holes through the

center of your marks.

Wall

4mm hole

3. Insert the plastic wall anchors into the 4mm holes and drive the self-tapping

screws into the anchors.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Žádné komentáře

TP-LINK N600 Instalační příručka Strana 12