TP-LINK TL-SG5428 Uživatelská příručka stáhnout pdf (Strana 213)

200

Syntax

snmp-server traps snmp [ linkup | linkdown | warmstart | coldstart ]

no snmp-server traps snmp [ linkup | linkdown | warmstart | coldstart ]

Parameter

linkup —— Enable linkup trap. It is sent when port status changes from

linkdown to linkup. By default, it is enabled.

linkdown ——Enable linkdown trap. It is sent when port status changes from

linkup to linkdown. By default, it is enabled.

warmstart —— Enable warmstart trap. It is sent upon SNMP function reboot. By

default, it is enabled.

coldstart —— Enable coldstart trap. It is sent upon switch reboot. By default, it is

enabled.

Command Mode

Global Configuration Mode

Example

Enable SNMP standard linkup trap for the switch:

TL-SG5428(config)# snmp-server traps snmp linkup

snmp-server traps link-status

Description

The snmp-server traps link-status command is used to enable SNMP link

status trap for the specified port. To disable the sending of SNMP link status trap,

please use no snmp-server traps link-status command.

Syntax

snmp-server traps link-status

no snmp-server traps link-status

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Enable SNMP link status trap for port 3:

TL-SG5428(config)# interface gigabitEthernet 1/0/3

TL- SG5428(config-if)# snmp-server traps link-status

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 238 239

Žádné komentáře

TP-LINK TL-SG5428 Uživatelská příručka Strana 213