TP-LINK TL-SG5428 Uživatelská příručka stáhnout pdf (Strana 190)

177

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Enable the Loop Protect function for port 2:

TL-SG5428(config)# interface gigabitEthernet 1/0/2

TL-SG5428(config-if)# spanning-tree guard loop

spanning-tree guard root

Description

The spanning-tree guard root command is used to enable the Root Protect

function for a port. With the Root Protect function enabled, the root bridge will

set itself automatically as ERROR-PORT when receiving BPDU packets with

higher priority, in order to maintain the role of root ridge. To disable the Root

Protect function, please use no spanning-tree guard root command.

Syntax

spanning-tree guard root

no spanning-tree guard root

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Enable the Root Protect function for port 2:

TL-SG5428(config)# interface gigabitEthernet 1/0/2

TL-SG5428(config-if)# spanning-tree guard root

spanning-tree guard tc

Description

The spanning-tree guard tc command is used to enable the TC Protect of

Spanning Tree function for a port. To disable the TC Protect of Spanning Tree

function, please use no spanning-tree guard tc command. A switch removes

MAC address entries upon receiving TC-BPDUs. If a malicious user

continuously sends TC-BPDUs to a switch, the switch will be busy with

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 238 239

Žádné komentáře

TP-LINK TL-SG5428 Uživatelská příručka Strana 190