TP-LINK TL-WR702N Specifikace stáhnout pdf (Strana 116)

TL-WR702N 150Mbps Wireless N Nano Router

- 110 -

6.5.1 LAN

Choose menu “Network → LAN”, and then you can configure the IP parameters of the LAN on

the screen as below.

Figure 6-6 LAN

¾ MAC Address - The physical address of the LAN ports, as seen from the LAN. The value

can't be changed.

¾ IP Address - Enter the IP address of your Router in dotted-decimal notation (factory default:

192.168.0.254).

¾ Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.

)

Note:

1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router.

2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP

Address pool in the DHCP server will be configured automatically，while the Virtual Server and

DMZ Host will not take effect until they are re-configured.

6.6 Wireless

Figure 6-7 Wireless menu

There is one submenu under the Wireless menu (shown in Figure 6-7): Wireless Settings. Click

it, and you will be able to configure the corresponding function.

6.6.1 Wireless Settings

Choose menu “Wireless → Wireless Settings”, and then you can configure the basic settings

for the wireless network on this page.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 174 175

Žádné komentáře

TP-LINK TL-WR702N Specifikace Strana 116