TP-LINK TD-W8980 Specifikace stáhnout pdf (Strana 54)

TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

Figure 4-31

¾ SSID: Wireless network name shared among all points in a wireless network. The SSID must

be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32

characters (use any of the characters on the keyboard). Make sure this setting is the same for

all stations in your wireless network. Type the desired SSID in the space provided. The default

SSID is set to be TP-LINK_2.4GHz_XXXXXX.

¾ Region: Select your region from the drop-down list. This field specifies the region where the

wireless function of the modem router can be used. It may be illegal to use the wireless

function of the modem router in a region other than one of those specified in this field. If your

country or region is not listed, please contact your local government agency for assistance.

)

Note:

Limited by local law regulations, version for North America does not have region selection option.

¾ Mode

: Select the desired mode.

11b only: Select if all of your wireless clients are 802.11b.

11g only: Select if all of your wireless clients are 802.11g.

11n only: Select only if all of your wireless clients are 802.11n.

11/jointfilesconvert/230789/bg mixed: Select if you are using both 802.11b and 802.11g wireless clients.

11/jointfilesconvert/230789/bgn mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.

Select the desired wireless mode. When 802.11g mode is selected, only 802.11g wireless

stations can be connected to the modem router. When 802.11n mode is selected, only

802.11n wireless stations can connect to the modem router. It is strongly recommended that

you set the Mode to 802.11b&g&n, and all of 802.11b, 802.11g, and 802.11n wireless

stations can connect to the modem router.

¾ Channel: Select the channel you want to use from the drop-down List of Channel. This field

determines which operating frequency will be used. It is not necessary to change the wireless

channel unless you notice interference problems with another nearby access point.

¾ Channel Width: Select the channel width from the drop-down list

. The default setting is

automatic, which can adjust the channel width for your clients automatically.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 116 117

Žádné komentáře

TP-LINK TD-W8980 Specifikace Strana 54