TP-LINK TL-WA5110G V2 Instalační příručka stáhnout pdf (Strana 2)

Note

If the LEDs display abnormally, please check to see if all the cable connectors

(power adapter and Ethernet cable) are well connected to your device.

Solid light

Flashing if the Wireless Radio

function is enabled

Solid light or flashing

Flashing

Turn on all your network devices and then check to see if the LEDs on the AP

display normally as the diagram below describes.

Note

You will need to assign your computer a Static IP address within the

same range as the AP’s IP address. See the Troubleshooting T3 if you

need assistance.

Open your web browser and

type in http://192.168.1.254

in the address bar and press

Enter

1 2 3 4 5 6 7 ... 13 14

Žádné komentáře

TP-LINK TL-WA5110G V2 Instalační příručka Strana 2