TP-LINK TL-SC3130 Uživatelský manuál

TL-SC3130 2-Way Audio Surveillance Camera REV: 2.0.3 1910010493

Chapter 3 Using IP Camera via Web Browser 3.1 Obtain the IP Address 1. Insert the provided CD into your CD-ROM driver. The Setup Wizard will automa

3. After the installation is finished, click the icon on the desktop or click Start > All Programs > TP-LINK > Intelligent IP Installer &g

4. The following screen will then display. Click the Search button to search Network Cameras in the network; it displays the Network Cameras informat

) Note: The default User name “admin” and Password “admin” are set at the factory for the administrator. You can change them in the Account Menu. (Pl

3.3 Mac Web Browser .3 Mac Web Browser 1. Click the Safari icon on the screen as the figure below shown, and enter the IP address (obtain from 3.1 O

2. Enter the default User name “admin” and password “admin” in the dialog box as shown below. ) Note: The default Name “admin” and Password “admin”

3. The web-based management page will be displayed on your screen. In the leftmost column of the web-based management page are Setting, Client Settin

Chapter 4 g Operating IP Camera via Mobile Phone 4.1 Mobile Phone Viewing 4.1.1 3G Mobile Phone Streaming ViewinFor 3G mobile phone viewing, t

4.2 Using IP Camera via iPhone .2 Using IP Camera via iPhone You can use TP-LINK Web User Interface via iPhone. Please follow the setting process be

Chapter 5 Configuration of Main Menu You would find that the illustrative web pages in this Manual are all orange. Please note that they're from

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other b

5.1.2 Zoom in / out the image via the monitor window z Click to display the digital zoom in window. z Pull the to adjust the di

5.1.4 Audio buttons Symbols Meaning ) Note Speakers turned on means the speakers of your computer are turned on to transmit the sounds from the c

5.3 Client Setting .3 Client Setting This function is only for the client. Click this button to configure the settings of IP Camera, which includ

5.3.3 Protocol Select the transferring protocol from TCP, UDP, HTTP and Multicast. ) Note: This item appears just after RSTP mode is enabled (sele

5.4.1 Brightness The higher the brightness value is, the brighter the image is. 5.4.2 Contrast The contrast is a measure of a display system, defi

Chapter 6 Setting-Basic Click BASIC to display the submenus including System, Camera, Network and Security. 6.1 System Click System to display the

6.1.2 Date / Time The Date/ Time page displays all options of time setting. ¾ Current date / time: Displays the current date and time of this IP C

be the same as the current date / time option. ¾ Daylight Saving Time: You can select On to enable the Daylight Saving Time function. z Start

and then restarted. ¾ Firmware Upgrade: Upgrade the device software. Click Browse… and select the file for upgrading. A confirmation dialogue will a

6.2.1 General ¾ RTSP z RTSP Port: Specify the transmission port number of RTSP streaming. The default value is 554. ¾ RTP z Port Range: Specif

FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

6.2.2 MPEG4 A. Computer View ¾ Viewer Authentication: If the viewer authentication is On, the users will be requested to type in username and pass

the video data (the default value is 8090). You can specify an even number from 1024 to 65534. If you change the setting of Video / Audio Port Number,

6.2.3 MJPEG ¾ Viewer Authentication: If the viewer authentication is On, the users will be requested to type in username and password. ¾ Image Si

6.3.1 Information The page of Information displays the MAC address of the device. ¾ Obtain an IP address automatically (DHCP): (If a DHCP server

¾ Use the following IP address: Select this when the fixed IP address is set. z IP address: Enter the IP address of the device. z Subnet mask: Ent

) Note: If you connect the IP Camera with your computer directly, the default network domain of camera is 192.168.1.x. 6.3.2 PPPoE (Point-to-Point

¾ Use the following DNS server address: Select this when you set the fixed IP address as the IP address of DNS server. z Primary DNS server: Enter

¾ Server name: Choose the DDNS Server from the list. ¾ User ID: Enter the user ID for authentication necessary for DDNS connections. Type it up to

2. Input all information and follow step by step with DynDNS. 33

3. Log in with new account and click Account → My Hosts → Add Host Services. 4. Type domain in the Hostname field and select sub-domain. 34

CONTENTS Package Contents...1 Ch

5. After typing in information, check your DDNS service. 6. Type your DDNS User ID, Password and Host name in Setting → Network → DDNS. After comple

6.3.4 UPnP (Universal Plug and Play) Choose menu “Network→UPnP”, and then you can view the information about UPnP (Universal Plug and Play) in the s

¾ Device Name: Enter Device Name to your needs. ) Note: How to use Bonjour in your Windows Browser UI? Please check the link below: http://www.app

¾ Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE. When the network settings related to the chosen notify type are chan

z POP server name: It is necessary when the POP before SMTP is selected in Authentication. Type the POP (receiving mail) server name up to 64 charac

6.4 Security Click Security to display the submenus including Account and HTTPS. 6.4.1 Account The device default account and password setting is “

z The Operator mode can not only view the Live View but also control the PTZ (apply in speed dome). z The Viewer mode only can view the Live View. ¾

) Note: When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username and password and do not protect video and audio.

Chapter 7 Setting-Advanced Click Advanced to display the submenus including FTP client, SMTP, HTTP event, Schedule, Motion detection and System Log.

7.1.1 General Select On when you use FTP function. The FTP client setting page will appear. Select Off when you do not wish to use the FTP client

6.1.3 Initialize...22 6.2 Camera .

¾ Remote Path: Type the path to the destination in FTP server up to 64 characters. ¾ Image File Name: Type the file name you want to assign to the

) Note: You can set motion detection on motion detection page. (Please go to “Setting → Advanced →Motion detection → Setting”) For more details, you

) Note: You can set motion detection on Alarm buffer page. (Please go to “Setting → Advanced → Alarm buffer → Setting”) For more details, you can

7.1.3 Periodical sending You can set to send an image file to FTP server periodically by selecting On to send the image file to FTP server linked w

z Sequence number clear: Click Clear and the suffix of the sequence number returns to 1. ¾ Interval: Set the time interval of the period sending. Mi

7.2.1 General Select On when you use the SMTP function. The common setting options are displayed below. Select Off if you do not wish to use the

) Note: If you use g-mail as your mail server, you should set 587 as your port number and check SSL box. ¾ Authentication: Select the authentication

characters standing for the sensor type added to the subject. ¾ Message: Type the text of the E-mail up to 384 characters. (A line break is equivalen

¾ Alarm z Motion Detection: Click it for using Motion Detection function as a sensor. You can set motion detection function on the motion detection

) Note: You can set motion detection on motion detection page. (Please go to “Setting → Advanced →Motion detection → Setting”) For more details, you

Package Contents The follow items should be found in your package: ¾ TL-SC3130 2-Way Audio Surveillance Camera ¾ Power Adapter ¾ Mounting Bracket

) Note: You can set motion detection on Alarm buffer page. (Please go to “Setting → Advanced → Alarm buffer → Setting”) For more details, you can

7.2.3 Periodical sending You can set to send an image file by SMTP server periodically by selecting On to send the image file by SMTP server linked

digits), minute (2 digits) and second (2 digits), and consecutive number (2 digits), thus 14-digit number is added to the file name. z Sequence numbe

7.3.1 General ¾ HTTP event: Set up the HTTP server URL, port, User ID, Password, and Proxy Server settings. 58

For example: URL: 192.168.1.7/cgi-bin/operator/ptzset ) Note: 1. The setting of URL should be the same as CGI. 2. The example above is for reference

Alarm sending: Select On to set to send mail with connection to the alarm detection. ¾ Alarm z Motion Detection: Click it for using Motion Detection

) Note: You can set motion detection on Alarm buffer page. (Please go to “Setting → Advanced → Alarm buffer → Setting”) For more details, you can

z Message: message will show up in the form of Message = PTZ down. If your target device didn’t support the parameter of message, you can’t see the m

7.4.1 Setting ¾ Schedule Selection: Select the list box to specify the schedule you want to set. z FTP -Alarm z FTP - Periodical z e-Mail (

7.5.1 Setting Alarm buffer: The basic setting options are displayed below. ¾ Recording capacity z Pre-alarm period: Display the maximum record

Chapter 1 Minimum System Requirements We strongly recommend your computers follow our minimum requirements in order to use this IP-Camera normally. I

) Note: The value of Recording capacity differs depending on Image size, Bitrate (for MPEG4) and Image quality (for MPEG4 and MJPEG) in the camera set

7.6.1 Setting ¾ Threshold: It means the extent which the alarm will be triggered. The default value is 50 and the value range is 0~100. The large

7.7.1 Setting ¾ Enable remote log: Enables user to send the log data to a specified log server. ) Note: There is a function called Watchdog which

68 Appendix APPENDIX a – FRAME RATE & BIT RATE TABLE This chapter provides tables that help you to optimize your IP camera with your network envir

69 320*240 512 15 600 16 160*120 1024 30 950 30 160*120 1024 15 750 16 160*120 512 30 500 30 160*120 512 15 50 16 160*120 128 30 130 30 16

70 320*240 Medium 15 350 13 160*120 Medium 5 130 5 160*120 Excellent 15 600 13 160*120 Excellent 5 230 5 160*120 Good 15 300 13 160*120 Good

71 B.3 MPEG4 Storage Requirement GB / channel / day Image-Size Bitrate Setting Frame-Rate Setting Current Bitrate 640*480 2048 30 23.0 640*480 204

FAQ Q1. What can I do if I forgot the login name and password? Press and hold the Reset button on the bottom panel with a pin or paperclip. Please con

Chapter 2 Physical Overview 2.1 Front View Focus Adjustment Ring: Adjust the focus ring to get a clear image. Network LED Indicator: It lights up

2.3 Hardware Connection Before proceeding, confirm that your PC is connected to your router and can access the Internet. Make sure that your router’s